Ingenious Ways to Inflate Your Air Mattress: No Pump Needed

Normally, you will get a pump with your air mattress to inflate/deflate it. However, you have to come up with a way to blow it up if you break your pump or are out in the wilderness and have no access to a power source. 

It might seem like an overwhelming situation, but it’s not. We have developed this guide to assist you in getting out of this predicament without a fuzz. You can conveniently use a vacuum, a leaf blower, or a hair dryer. The idea is to get anything that can blow air and use it to blow up the mattress. 

In the following guide, we will provide you with all the instructions to fill the mattress without an electric air pump.

Use an External Pump: Electric, Foot, or Hand Pumps

You will have a pump with you in most cases if you have an air mattress (check the top rated air mattresses for long term use). A built-in air mattress pump that run on electricity is the typical example. If you don’t have access to electricity or are out there in the wild, you will need a manual air compressor or pump. And the most apparent one of these pumps is a hand pump. 

This mechanism pulls external air by decreasing the pressure inside and pulling it up. You will find some models of air mattresses with double-action hand pumps.

Therefore, you can use them to pump air without any power source. Just insert the hose of the hand pump into the valve and start pumping. Some manufacturers suggest that you should inflate up to 90 percent. So, you will have to take a few breaks during your pumping session, especially if you have a large mattress. 

You can always take some help from someone else with you, and once you are done pumping the air, take the pump’s hose out and put the cap back on the world. 

If your air mattress doesn’t come with an inbuilt pump, you can also use your bike pump as it can work as a hand pump for you. Foot pumps are a good option too. 

You will have to make sure that the nozzle of the hand pump that you are using fits perfectly. Otherwise, you will have to go for some reinforcements. But keep in mind that these manual pumps need more time and effort from you. 

Inflating an Airbed with a Hair Dryer

A hairdryer is a pretty good option that you can use to blow up your air mattress. But, of course, you will need electricity to make this happen. Another thing that you will have to keep in mind is that you will have to make sure that you seal the connection between the air mattress valve and your hair dryer properly. 

The outlet of your hair dryer might be wider or narrower than the vale of the air mattress. So, you will have to use an adapter or a similar vacuum nozzle. You can use a paper sheet and make a cone of it by wrapping one side right around the dryer and fitting the other side to the valve of the air mattress. 

You will also have to make sure that you don’t blow up your mattress using hot air with your hair dryer. Plus, keep in mind to close the valve as fast as you can, or you will lose some air in the process, and the mattress will not be properly inflated. 

If you lose some air like this, you can always use a quality mattress topper to make the top surface more comfortable for you. You also can use some good-quality pillows to make the surface more comfortable to lay down (check 8 most comfortable air mattresses). 

Using Other Home Appliances to Inflate a Mattress or Airbed

A leaf blower is another appliance that you can use to blow air inside your mattress. You can use a leaf blower or a snow blower, but you will have to make a tight connection between your mattress valve and the blower. 

Using a vacuum hose to mediate this situation can be useful. But keep in mind that you need to start the leaf or snow blower at its lower setting, or it will blow a lot of air inside your mattress pretty fast. You might risk rupturing your mattress. 

Another option you can explore here is your vacuum cleaner. If your vacuum comes with exhaust features and a hose attachment, you are all ready to blow your mattress up. 

Just make sure your vacuum is clean and remove the dirtbag or the container. Also, make sure to run your vacuum without it for about 10 to 15 seconds, so there is no debris left inside. 

Now replace your regular nozzle with a thin one, and if you don’t have one, you can leave it. Just lay the mattress flat on the ground and attach the vacuum hose with the mattress valve. Just turn on the exhaust of your vacuum and start inflating your mattress. 

Blow Air into the Mattress Use a Garbage or Refuse Bag to Inflate an Air Bed

Right now, you won’t have a problem pumping air into your mattress without a pump. But using appliances to blow up your mattress will require a power source. And if you are out there in the wild, you might not have any access to electricity. 

Just lay the mattress flat on the ground and start swinging your bag around to collect some air until it inflates. After that, hold the open end tightly to keep the air inside it. 

The next step is to open the mattress valve, place the open end right around it, and secure it with a rubber band. Just press the air from the bag into your mattress and increase the pressure gradually, or you will risk budding your bag. You can continue doing it until your mattress is fully inflated. 

Old School Method – Use Your Lungs

Okay, so this might not be the ideal option, but you can use your lung power if you don’t have access to any of the things above. It will take a lot of time and effort, but it will get the job done if you are consistent enough. 

Keep blowing into the mattress valve slowly and without putting in a lot of effort. Otherwise, you will be fainting yourself, and your jaw will hurt like crazy for some time. 

Consistency is key here, and you will have to take some rest in-between to make sure that you don’t make your jaw tired. Try to hold the valve tightly when you are resting your lungs, or the air will keep escaping making all your lung effort in vain. 

You can save yourself from this hassle and consider going for a self-inflating mattress. It has a layer of compressible foam sandwiched within the airtight envelope. As soon as you open the valve, it will start sucking air in.

Environmental Benefits of Manual Inflation Methods

While the convenience of electric pumps can’t be denied, resorting to manual methods for inflating your air mattress offers some environmental benefits worth considering. Using non-electric methods reduces energy consumption, making it a greener alternative. This is especially true if you often find yourself inflating and deflating your mattress.

Moreover, manual methods eliminate the need for batteries or electronic waste when pumps become non-functional. By opting for simple tools like garbage bags or leveraging the power of your lungs, you’re not only ensuring a comfortable sleep but also making a conscious choice to reduce your carbon footprint. It’s a small step, but every effort counts in our collective journey towards a sustainable future.

Wrap up

There are different ways to inflate your mattress, even if you don’t have a pump or are out there in the wild. You can use your hair dryer, vacuum, or leaf blower to blow up your mattress if you have access to electricity. 

And if you don’t have access to electricity, you can always use a manual pump, a garbage bag, or even use your lung power.