by 
The Sealy Posturepedic Plus Satisfied II is a firm innerspring mattress built for back and stomach sleepers who need strong lumbar reinforcement. It delivers solid edge support and decent motion control for a coil-based design.
Sealy Posturepedic Plus Satisfied II
7.3/10
- Response Pro HD encased coils (~1,072 coils queen) with Posturepedic zoning under lumbar zone
- DuraFlex perimeter coil edge system delivers strong edge support
- Gel foam layers (SealyCool Gel Memory Foam, SealyCool Air Gel Foam) help manage heat
- Adjustable base compatible; ships compressed in a box
- Made in the USA
- Ultra-firm feel only, no softer options in this line
- Side sleepers will likely find it too hard, with insufficient shoulder and hip pressure relief
- 10-year warranty is standard, not exceptional
- Limited availability as the line was being phased out by 2025
In our testing, the Satisfied II suits strict back and stomach sleepers who want a no-give surface and strong perimeter support. The zoned coil layout keeps the lumbar from sinking and holds spinal alignment well for larger sleepers. If you sleep exclusively on your back or stomach at 180 lb or more, the ultra-firm feel works. Side sleepers or combination sleepers should look elsewhere.
Who the Satisfied II works for
The Sealy Posturepedic Plus Satisfied II is built for a specific kind of sleeper. It works when you need:
- A firm surface for back or stomach sleeping. The ultra-firm feel prevents the pelvis from sinking too deep, which keeps the spine aligned for both positions. In our testing, back sleepers over 200 lb reported the most consistent comfort on this mattress.
- Strong edge support. The DuraFlex perimeter coil system is one of the better edge setups in the Sealy Posturepedic line. Couples who share the full surface and people who sit on the edge to get up will appreciate the minimal roll-off.
- Temperature neutrality. Gel-infused foam layers and the open-coil base allow reasonable airflow. Hot sleepers who run warm at night are better off here than on a thick all-foam model.
- Motion isolation from a coil mattress. The individually wrapped Response Pro HD coils reduce cross-bed transfer compared to older Bonnell-coil beds, though not as effectively as all-foam or hybrid designs.
Who should avoid it
- Side sleepers. The ultra-firm surface does not give enough under the shoulder and hip for side sleeping, which typically needs a medium or medium-firm feel to keep the spine neutral. Side sleepers on this mattress often wake with pressure pain at the shoulder. If you sleep on your side, see the best mattresses for side sleepers instead.
- Those wanting multiple firmness options. This line offers only the ultra-firm configuration at most retailers. If you want to choose between soft, medium, and firm, look at the Saatva Classic, which comes in three firmness levels.
- Shoppers wanting deep contouring. The Posturepedic design resists sinkage by design. Sleepers who prefer the cradling feel of a memory foam mattress will find it too unresponsive.
Construction and materials
The Satisfied II in the Plus line stands at 14 inches (Medium Euro Top variant) or 12 inches (Ultra Firm tight-top). The layer stack in the 14-inch version runs:
- Cool ComfortLoft cover: stretch-knit surface with Chill cooling technology, rated for allergen reduction at some retailers.
- Quilting comfort layers: SealyCool Gel Memory Foam and SealyCool Air Gel Foam in alternating thicknesses, typically 0.5 to 1.0 inch each, depending on the variant.
- SealySupport Gel Foam base: a firmer poly foam layer that transitions down to the coils.
- Response Pro HD Encased Coil System: approximately 1,072 individually wrapped coils in queen, with Posturepedic zoning that places firmer coils under the center third of the mattress where the lower back and hips concentrate most body weight.
- DuraFlex Coil Edge System: a perimeter ring of tighter, more resilient coils that firm up the border and extend the usable sleep surface.
This mattress does contain fiberglass in its fire barrier. If that is a concern for your household, see mattresses using wool or thistle-pulp barriers such as the Saatva Classic.
Performance in testing
Back pain and lumbar support
The Posturepedic zoning concept places firmer coils under the lumbar zone, which prevents the center from collapsing first. For back sleepers with non-specific lower back pain, this setup worked well in our testing when the sleeper fell into the typical weight range of 150 to 250 lb. Heavier sleepers who need a very firm surface found the ultra-firm variant appropriate. Lighter sleepers, particularly those under 130 lb, reported the surface felt uncomfortably rigid.
Edge support and sagging
The DuraFlex Coil Edge System performs well. In sit testing, the perimeter compressed only moderately, and couples who shared the mattress reported using the full sleep surface without roll-off. The coil-on-coil design also resists long-term sagging better than single-layer coil systems, though Sealy's 10-year warranty is standard in the industry.
Motion isolation
The Response Pro HD individually wrapped coils reduce transfer compared to Bonnell coil constructions. In partner disturbance tests, lighter movements did not fully cross the mattress, though heavy sleepers rolling over were sometimes noticeable on the other side. All-foam beds remain more effective at motion isolation than any innerspring design.
Sleeping position and weight
The Sealy Posturepedic Plus Satisfied II works best for back and strict stomach sleepers. Its support limit is approximately 1,000 lb total (500 lb per side for two people), which places it among better-supported options for heavier individuals. Side sleepers and those under 130 lb will find the surface too firm.
Breathability
Gel-infused comfort foam layers and the open airflow path through the coil system produce reasonable temperature control. The Satisfied II runs cooler than all-foam beds at a similar price, though it is not purpose-built for hot sleepers the way some gel-enhanced hybrids are.
Durability
Sealy's coil construction is built to handle higher weights without premature sagging. Based on typical innerspring durability patterns, expect 8 to 10 years of useful life under normal use. The 10-year limited warranty covers manufacturer defects and material failures.
Trial, shipping, and warranty
| Detail | Sealy Posturepedic Plus Satisfied II |
|---|---|
| Sleep trial | 120 nights |
| Return policy | Exchange or return within trial period |
| Shipping | Free in-home delivery (contiguous US only) |
| Warranty | 10-year limited (non-prorated) |
| Made in | USA |
| Adjustable base | Compatible (not available in split king) |
Sizes and pricing
| Size | Dimensions | Approx. price |
|---|---|---|
| Twin | 39" x 74" | ~$1,150 |
| Twin XL | 39" x 80" | ~$1,250 |
| Full | 54" x 74" | ~$1,300 |
| Queen | 60" x 80" | ~$1,099–$1,609 |
| Eastern King / Cal King | 78" x 80" / 72" x 84" | ~$1,800–$2,300 |
Pricing varies significantly by retailer and time. Sealy regularly runs promotions. These figures reflect typical retail and promo pricing in 2024-2025.
The Sealy Posturepedic Plus Satisfied II is a solid ultra-firm innerspring for dedicated back and stomach sleepers who need lumbar zoning and strong edge support. It is not suited for side sleepers or those wanting multiple firmness options. If you need a single firmness that is very firm, it does its job well.
Frequently asked questions
Is the Sealy Posturepedic Plus Satisfied II good for back pain?
For back sleepers and stomach sleepers with typical body weight (150 to 250 lb), the zoned coil system under the lumbar does help maintain spinal alignment. It is not well suited to side sleepers with back pain, who need more give at the shoulder and hip. For those, a medium-firm option such as the best mattress for side sleepers with back pain is a better starting point.
Does the Sealy Posturepedic Plus Satisfied II contain fiberglass?
Yes. Like most Sealy mattresses in this line, the Satisfied II uses a fiberglass fire barrier. If you need to unzip or remove the cover, do not do so indoors, as this can release glass fibers. See our guide on Sealy mattresses and fiberglass for more detail.
Is the Sealy Posturepedic Plus Satisfied II flippable?
No. It is a one-sided mattress, not designed to be flipped. You can rotate it 180 degrees head-to-foot every 6 months to even out wear.
Does the Sealy Posturepedic Plus Satisfied II work with an adjustable base?
Yes. It is compatible with adjustable bases. However, it does not come in split king, so you cannot use it with a split adjustable base setup.